HGT Thin Section Angular Contact Ball Bearing
Compared with the Thin Section Radial Contact Ball Bearings (C type), the Thin Section Angular Contact Ball Bearings (A-type)has enough radial clearance to form a sufficient contact angle to bear the axial load. The contact angle of the standard bearing is 30°.
Thin Section Angular Contact Ball Bearing without Seals
The bearing can withstand the axial load and a tremendous radical load. Under a specific axial load, the inner and outer rings of the bearing can be adjusted for preloading.
This assembly method enables the Thin Section Angular Contact Ball Bearings (A-type) to install more balls than the Thin Section Radial Contact Ball Bearings (C-type) that do not have the holes for ball installation. Additionally, a larger contact angle can be formed to achieve a greater capacity of carrying an axial load.
Due to its bearing capacity in one direction, the bearing should be installed symmetrically in pairs with another bearing to set and ensure the contact angle and minimize the axial movement under an alternating axial load.
If you need the Thin Section Angular Contact Ball Bearings, please feel free to email us at [email protected].
